Interface SetLinkBridgeSlaveTypeArgs

Set link bridge-slave type args.

Hierarchy

  • SetLinkBridgeSlaveTypeArgs

Properties

backup_port? cost? fastleave? fdb_flush? flood? group_fwd_mask? guard? hairpin? isolated? learning? mcast_fast_leave? mcast_flood? mcast_router? mcast_to_unicast? neigh_suppress? nobackup_port? priority? proxy_arp? proxy_arp_wifi? root_block? state? vlan_tunnel?

Properties

Optional backup_port

backup_port?: string

If the port loses carrier all traffic will be redirected to the configured backup port

Optional cost

cost?: number

Set port cost (allowed values are between 1 and 65535, inclusively).

Optional fastleave

fastleave?: OnOffToggle

Enable multicast fast leave on this port.

Optional fdb_flush

fdb_flush?: true

Flush bridge slave's fdb dynamic entries.

Optional flood

flood?: true

Open the flood gates on this port, i.e. forward all unicast frames to this port also. Requires proxy_arp and proxy_arp_wifi to be turned off.

Optional group_fwd_mask

group_fwd_mask?: number

Set the group forward mask. This is the bitmask that is applied to decide whether to forward incoming frames destined to link-local addresses, ie addresses of the form 01:80:C2:00:00:0X (defaults to 0, ie the bridge does not forward any link-local frames coming on this port).

Optional guard

guard?: OnOffToggle

Block incoming BPDU packets on this port.

Optional hairpin

hairpin?: OnOffToggle

Enable hairpin mode on this port. This will allow incoming packets on this port to be reflected back.

Optional isolated

isolated?: OnOffToggle

Optional learning

learning?: true

Allow MAC address learning on this port.

Optional mcast_fast_leave

mcast_fast_leave?: OnOffToggle

This is a synonym to the fastleave option above.

Optional mcast_flood

mcast_flood?: OnOffToggle

Controls whether a given port will flood multicast traffic for which there is no MDB entry.

Optional mcast_router

mcast_router?: number

Configure this port for having multicast routers attached. A port with a multicast router will receive all multicast traffic. MULTICAST_ROUTER may be either 0 to disable multicast routers on this port, 1 to let the system detect the presence of routers (this is the default), 2 to permanently enable multicast traffic forwarding on this port or 3 to enable multicast routers temporarily on this port, not depending on incoming queries.

Optional mcast_to_unicast

mcast_to_unicast?: OnOffToggle

Controls whether a given port will replicate packets using unicast instead of multicast. By default this flag is off.

Optional neigh_suppress

neigh_suppress?: OnOffToggle

Controls whether neighbour discovery (arp and nd) proxy and suppression is enabled on the port. By default this flag is off.

Optional nobackup_port

nobackup_port?: true

Removes the currently configured backup port.

Optional priority

priority?: number

Set port priority (allowed values are between 0 and 63, inclusively).

Optional proxy_arp

proxy_arp?: true

Enable proxy ARP on this port.

Optional proxy_arp_wifi

proxy_arp_wifi?: true

Enable proxy ARP on this port which meets extended requirements by IEEE 802.11 and Hotspot 2.0 specifications.

Optional root_block

root_block?: true

Block this port from becoming the bridge's root port.

Optional state

state?: BridgeSlavePortStates

Set port state.

Optional vlan_tunnel

vlan_tunnel?: OnOffToggle

Controls whether vlan to tunnel mapping is enabled on the port. By default this flag is off.

Settings

Member Visibility

Theme

On This Page

Generated using TypeDoc